Search
Search Results
-
Aircraft Fatigue Management
Fatigue occurs under cyclic loading and can significantly degrade the operational capability and safety of metallic aircraft components and...
-
Handling Fatigue
There is no single accepted definition of the different types of fatigue a person can experience, but MF (cognitive impairment), physical fatigue and... -
Fatigue Demystified
The study of metal fatigue dates back to 1844. Despite many breakthroughs in understanding, there is still much debate over the significance of some... -
Fatigue Testing. Fatigue Curve Construction and Fatigue Limit Assessment
At the base of fatigue design there is the Wöhler’s curve S–N that is obtained through fatigue tests. Giving a stress amplitude S or strain amplitude... -
Stress-Based Fatigue Analysis—High Cycle Fatigue
In Sect. 1.2 we have introduced the Wöhler curve and the S–N curve. Generally, they are considered to be the... -
Fatigue
Das Fatigue-Syndrom, als Fatigue oder auch Erschöpfungssyndrom betitelt, kann als begleitendes Symptom bei akuten und chronischen Erkrankungen... -
Corrosion Fatigue
It is rather difficult to establish a simple yet comprehensive picture of the combined effects of fatigue and environment. It is the author’s view... -
Fatigue and Corrosion in Metals
With its combination of readability, love for details and rigor, “Fatigue and Corrosion in Metals” has become an authoritative reference work that...
-
Strain-Based Fatigue Analysis—Low Cycle Fatigue
Three regions were identified in Sect. 1.2 and shown in Fig. 1.10 as Region... -
Multiaxial Fatigue
So far fatigue has been treated assuming that simple uniaxial loads were acting. The same S–N fatigue curves were obtained under uniaxial conditions,... -
Cognitive Fatigue
Contrary to earlier assumptions that MS fatigue is a unidimensional construct that can be captured by scales quantifying severity (e.g., Krupp et al.... -
Fatigue-Nucleating Discontinuities
Compared to the carefully prepared surfaces typical of traditional laboratory fatigue specimens, production aircraft structures have many surface... -
A fatigue model under Cosserat peridynamic framework for concrete fatigue cracking
A novel fatigue model under Cosserat peridynamic framework is proposed to investigate concrete fatigue performance. In this model, a novel cyclic...
-
Fatigue and Environment-Assisted Testing
Fatigue is the process of damage and failure of materials and structures due to cycling loading. It was demonstrated that under repeated loading... -
Fatigue Resistance
Fatigue resistance (or fatigue strength) is the property of a material that does not break down over time under the influence of changing workloads.... -
Fatigue in Stroke
Post-stroke fatigue (PSF) affects more than 50% of stroke survivors. Therefore, it is one of the most common complications of stroke. PSF is... -
Very High Cycle Fatigue
The traditional subdivision of the Wöhler curve into the three regions of Fig. 1.10 , at least for ferrous alloys... -
Effect of fatigue load on the bending tribo-corrosion-fatigue behaviors between the main cable wires
The main cable bent around the saddle of the suspension bridge is subjected to the wind, the vehicle, the bridge’s own weight and the corrosive...
-
Fatigue (Cyclic Deformation) in Semiconductors
WeakeningFatigue (cyclic deformation) of a material caused by cyclic loading resulting in structural damage leading to catastrophic failure is known... -
Fatigue in Multiple Sclerosis Background, Clinic, Diagnostic, Therapy
Fatigue is a major symptom in patients with multiple sclerosis (pwMS) and is mainly responsible for unemployment, early retirement but also social...