[go: up one dir, main page]
환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

빠른 주문
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기

가동 중단 시간 최소화

HARVI IV 8-날 엔드밀은 Kennametal의 고성능 다목적 엔드밀 HARVI 제품군에 추가된 최신 제품입니다. 7-날 엔드밀보다 더 높은 금속 제거율과 이송 속도를 제공하고 기존 9-날 엔드밀보다 더욱 다양한 기능을 제공하는 독특한 디자인의 HARVI IV 8-날 엔드밀은 고객이 가공하기 어려운 재료를 계속 절단할 수 있도록 합니다. 관통 절삭유 채널에서 강력한 칩 제거를 달성하면서 고온 합금, 스테인리스강, 강철 및 경화 자재에 대해 신뢰할 수 있는 단일 공구로 황삭 및 정삭 작업을 수행합니다. 8날 장착을 통해 업그레이드하고 가동 중단 시간을 최소화하십시오.

  • 직경 범위 3/8~1”, 10~25mm
  • 길이 범위 1.2~4.3xD
  • 내부 관통 쿨런트
  • 절삭 길이가 2xD를 초과하는 버전에 칩 스플리터 장착

 

아무리 거친 소재라도 어림 없습니다

  • 8날 디자인: 더 높은 가공 유연성과 공정 안정성으로 생산성 향상
  • 새로운 KCSM15A 등급 적용: 혁신적인 코팅 기술로 공구 수명 연장 및 내마모성 강화
  • 관통 쿨런트 공급: 칩을 제거하여 깊은 공동에서도 계속 절단 가능

당사의 새로운 KCSM15A 밀링 등급 적용

매우 다양한 용도의 HARVI IV 8-날 엔드밀은 당사의 새로운 스테인리스강, 티타늄 및 고온 합금 고체 엔드 밀링 등급 KCSM15A로 보완됩니다. 이 새로운 등급은 사용자에게 확장된 공구 수명을 제공하며 Kennametal의 견고한 카바이드 엔드 밀링 역사상 최고의 내마모성을 자랑하는 혁신적인 코팅 기술을 적용했습니다.

필터 선택
필터
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
  • P Steel (390)
    • P0
      Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (390)
    • P1
      Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS (390)
    • P2
      Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS (390)
    • P3
      Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS (390)
    • P4
      Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS (390)
    • P5
      Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS (390)
    • P6
      High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS (390)
  • M Stainless Steel (390)
    • M1
      Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS (390)
    • M2
      High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS (390)
    • M3
      Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS (390)
  • S High-Temp Alloys (390)
    • S1
      Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS (390)
    • S2
      Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS (390)
    • S3
      Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS (390)
    • S4
      Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS (390)
  • H Hardened Materials (390)
    • H1
      Hardened Materials 44-48 HRC (390)
    • H2
      Hardened Materials 48-55 HRC (390)
Applications
Applications
  • Pocket Pocket (390)
  • Pocket Helical Pocket Helical (390)
  • Pocket Milling Pocket Milling (390)
  • Ramping Ramping (390)
  • Shoulder Milling Shoulder Milling (390)
  • Shoulder Roughing Shoulder Roughing (390)
  • Shoulder Square End Shoulder Square End (390)
  • Trochoidal Milling Trochoidal Milling (390)
Cutting Diameter
Cutting Diameter
  • 0.375 in (18)
  • 0.394 in (12)
  • 0.473 in (24)
  • 0.5 in (56)
  • 0.625 in (60)
  • 0.63 in (28)
  • 0.75 in (60)
  • 0.787 in (32)
  • 0.984 in (28)
  • 1.0 in (72)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Diameter
Cutting Diameter
  • 9.525 mm (18)
  • 10.0 mm (12)
  • 12.0 mm (24)
  • 12.701 mm (56)
  • 15.875 mm (60)
  • 16.0 mm (28)
  • 19.05 mm (60)
  • 20.0 mm (32)
  • 25.0 mm (28)
  • 25.401 mm (72)
Cutting Diameter Min 받는 사람 Cutting Diameter Max
Cutting Length
Cutting Length
  • 12.701 mm (4)
  • 15.875 mm (12)
  • 19.05 mm (16)
  • 22.0 mm (6)
  • 25.401 mm (27)
  • 26.0 mm (12)
  • 31.75 mm (38)
  • 32.0 mm (14)
  • 38.0 mm (16)
  • 38.1 mm (3)
  • 40.0 mm (6)
  • 41.276 mm (48)
  • 44.45 mm (12)
  • 45.0 mm (14)
  • 47.625 mm (12)
  • 48.0 mm (12)
  • 50.801 mm (22)
  • 57.151 mm (12)
  • 63.5 mm (24)
  • 64.0 mm (14)
  • 80.0 mm (16)
  • 82.551 mm (24)
  • 100.0 mm (14)
  • 101.601 mm (12)
Cutting Length Min 받는 사람 Cutting Length Max
Cutting Length
Cutting Length
  • 0.5 in (4)
  • 0.625 in (12)
  • 0.75 in (16)
  • 0.866 in (6)
  • 1.0 in (27)
  • 1.024 in (12)
  • 1.25 in (38)
  • 1.26 in (14)
  • 1.496 in (16)
  • 1.5 in (3)
  • 1.575 in (6)
  • 1.625 in (48)
  • 1.75 in (12)
  • 1.772 in (14)
  • 1.875 in (12)
  • 1.891 in (12)
  • 2.0 in (22)
  • 2.25 in (12)
  • 2.5 in (24)
  • 2.52 in (14)
  • 3.15 in (16)
  • 3.25 in (24)
  • 3.938 in (14)
  • 4.0 in (12)
Cutting Length Min 받는 사람 Cutting Length Max
Reach
Reach
  • 0.67 in (4)
  • 0.851 in (12)
  • 0.92 in (4)
  • 1.033 in (12)
  • 1.044 in (6)
  • 1.17 in (3)
  • 1.226 in (12)
  • 1.238 in (12)
  • 1.34 in (12)
  • 1.42 in (4)
  • 1.476 in (10)
  • 1.534 in (12)
  • 1.545 in (14)
  • 1.67 in (3)
  • 1.704 in (12)
  • 1.754 in (6)
  • 1.851 in (12)
  • 1.853 in (16)
  • 1.909 in (12)
  • 1.965 in (24)
  • 2.104 in (12)
  • 2.158 in (12)
  • 2.204 in (12)
  • 2.218 in (14)
  • 2.226 in (10)
  • 2.454 in (12)
  • 2.59 in (12)
  • 2.783 in (12)
  • 2.805 in (14)
  • 2.954 in (12)
  • 3.507 in (16)
  • 3.59 in (12)
  • 3.704 in (12)
  • 4.383 in (14)
  • 4.454 in (12)
Reach Min 받는 사람 Reach Max
Reach
Reach
  • 17.026 mm (4)
  • 21.625 mm (12)
  • 23.375 mm (4)
  • 26.25 mm (12)
  • 26.526 mm (6)
  • 29.725 mm (3)
  • 31.151 mm (12)
  • 31.451 mm (12)
  • 34.025 mm (12)
  • 36.075 mm (4)
  • 37.5 mm (10)
  • 38.95 mm (12)
  • 39.25 mm (14)
  • 42.426 mm (3)
  • 43.276 mm (12)
  • 44.526 mm (6)
  • 47.026 mm (12)
  • 47.075 mm (16)
  • 48.475 mm (12)
  • 49.901 mm (24)
  • 53.45 mm (12)
  • 54.825 mm (12)
  • 55.975 mm (12)
  • 56.325 mm (14)
  • 56.551 mm (10)
  • 62.325 mm (12)
  • 65.775 mm (12)
  • 70.7 mm (12)
  • 71.25 mm (14)
  • 75.025 mm (12)
  • 89.075 mm (16)
  • 91.176 mm (12)
  • 94.075 mm (12)
  • 111.325 mm (14)
  • 113.125 mm (12)
Reach Min 받는 사람 Reach Max
Connection Style
Connection Style
  • SAFE-LOCK (180)
  • Straight-Cylindrical (210)
Over All Length [L]
Over All Length [L]
  • 2.5 in (8)
  • 2.835 in (6)
  • 3.0 in (43)
  • 3.269 in (12)
  • 3.5 in (37)
  • 3.543 in (6)
  • 3.622 in (14)
  • 4.0 in (82)
  • 4.094 in (16)
  • 4.134 in (12)
  • 4.5 in (12)
  • 4.764 in (14)
  • 4.921 in (14)
  • 5.0 in (36)
  • 5.5 in (12)
  • 5.71 in (16)
  • 6.0 in (24)
  • 6.891 in (14)
  • 7.0 in (12)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
Over All Length [L]
Over All Length [L]
  • 63.5 mm (8)
  • 72.0 mm (6)
  • 76.2 mm (43)
  • 83.0 mm (12)
  • 88.9 mm (37)
  • 90.0 mm (6)
  • 92.0 mm (14)
  • 101.601 mm (82)
  • 104.0 mm (16)
  • 105.0 mm (12)
  • 114.301 mm (12)
  • 121.0 mm (14)
  • 125.0 mm (14)
  • 127.0 mm (36)
  • 139.701 mm (12)
  • 145.0 mm (16)
  • 152.4 mm (24)
  • 175.0 mm (14)
  • 177.8 mm (12)
Over All Length [L] Min 받는 사람 Over All Length [L] Max
cornerConfiguration
Corner Style
Corner Style
  • RADIUS (325)
  • SQUARE END (65)
Corner Radius
Corner Radius
  • 0.0 in (65)
  • 0.015 in (9)
  • 0.02 in (18)
  • 0.03 in (47)
  • 0.039 in (18)
  • 0.06 in (47)
  • 0.079 in (18)
  • 0.09 in (30)
  • 0.098 in (18)
  • 0.119 in (18)
  • 0.12 in (42)
  • 0.157 in (12)
  • 0.19 in (32)
  • 0.237 in (4)
  • 0.25 in (12)
Corner Radius Min 받는 사람 Corner Radius Max
Corner Radius
Corner Radius
  • 0.0 mm (65)
  • 0.375 mm (9)
  • 0.5 mm (18)
  • 0.75 mm (47)
  • 1.0 mm (18)
  • 1.526 mm (47)
  • 2.0 mm (18)
  • 2.275 mm (30)
  • 2.5 mm (18)
  • 3.0 mm (18)
  • 3.051 mm (42)
  • 4.0 mm (12)
  • 4.825 mm (32)
  • 6.0 mm (4)
  • 6.351 mm (12)
Corner Radius Min 받는 사람 Corner Radius Max
application
Rough Finish
Rough Finish
  • FBS (212)
  • F (178)
backEnd
Back-End Diameter
Back-End Diameter
  • 9.525 mm (18)
  • 10.0 mm (12)
  • 12.0 mm (24)
  • 12.701 mm (56)
  • 15.875 mm (60)
  • 16.0 mm (28)
  • 19.05 mm (60)
  • 20.0 mm (32)
  • 25.0 mm (28)
  • 25.401 mm (72)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
Back-End Diameter
Back-End Diameter
  • 0.375 in (18)
  • 0.394 in (12)
  • 0.473 in (24)
  • 0.5 in (56)
  • 0.625 in (60)
  • 0.63 in (28)
  • 0.75 in (60)
  • 0.787 in (32)
  • 0.984 in (28)
  • 1.0 in (72)
Back-End Diameter Min 받는 사람 Back-End Diameter Max
No filters matching ""

HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Inch

(58) HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Inch

HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Inch

(12) HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Inch

HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Plain Shank • Inch

(51) HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Plain Shank • Inch

HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Plain Shank • Inch

(11) HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Plain Shank • Inch

HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Metric

(4) HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Metric

HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Metric

(24) HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Metric

HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Plain Shank • Metric

(29) HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Plain Shank • Metric

HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Metric

(24) HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Metric

HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Plain Shank • Metric

(5) HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Plain Shank • Metric

HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Metric

(29) HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Metric

HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Inch

(45) HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Inch

HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Inch

(65) HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Inch

HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Inch

(15) HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Inch

HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Inch

(9) HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Inch

HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Metric

(4) HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Metric

HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Metric

(5) HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Metric

문의 사항이 있으십니까?

당사의 숙련된 직원들이 귀하를 도와드릴 준비가 되어 있습니다.

추가 정보 요청
내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
product-image
Please adjust the following properties from

ISO 카탈로그 번호

ANSI 카탈로그 번호

to find similar products.

The following files are available

Please select a file to download

Models

I have read and accepted the Terms & Conditions of use

Can’t find the file type you’re looking for?

대시보드 정보를 보려면 로그인해야 합니다.
Session expired due to inactivity, please login again
장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
항목이 장바구니에 추가되었습니다.
장바구니 보기

. Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

Minimum quantity should be

SAP Material Number ISO 카탈로그 번호 등급    

Thank you for your registration, pending approval & completion of the registration, your access is currently limited. Full utilization of product search capabilities & collaboration space is available and will remain. Please allow 2 business days for registration completion.

등록해 주셔서 감사합니다. 지금 로그인하여 사이트를 이용하실 수 있습니다.

You are about to leave the Solution building process.

Are you sure you want to leave?